业务公告
Business bulletin
浙江华瑞航空制造有限公司钻铣设备国际招标项目招标公告
发布时间：2024-09-14 10:12:28
浙江华瑞航空制造有限公司钻铣设备国际招标项目招标公告
Tender announcement International bidding project of drilling and milling equipment of Huarui Aerospace Manufacturing Co., Ltd.
1. 招标条件Bidding Conditions
项目概况：钻铣设备
Overview: Erilling and Milling Equipment
资金到位或资金来源落实情况：国内自筹
Source of Funds：Domestic self-raised
项目已具备招标条件的说明：项目已审批，资金已落实
Description of The Prepared Bidding Conditions: Project has been considered, funds have been implemented
2. 招标内容Bidding Content
招标项目编号：0747-2440SCCZAH46
Bidding No：0747-2440SCCZAH46
招标项目名称：浙江华瑞航空制造有限公司钻铣设备国际招标项目
Project Name：International bidding project of drilling and milling equipment of Huarui Aerospace Manufacturing Co., Ltd.
项目实施地点：浙江省杭州市
Place of Implementation：Hangzhou, Zhejiang
招标产品列表：
序号 NO. | 产品名称Product Name | 数量 Quantity | 简要技术规格Main Technical Data |
1 | 钻铣设备 Erilling and Milling Equipment | 1台 1 set | 10.1 *有效工作行程: X轴：≥22000mm；Y轴：≥7000mm；Z轴：≥2000mm； C轴: ≥±275?； A轴：≥±110?（主轴吸尘罩规避干涉，A轴一侧行程可变为≥95°）； Z轴最低点初步规划距地面800mm，最高点初步规划距地面2800mm，最终在详细设计阶段确认。 设备X轴行程尺寸规划时需考虑长度21米产品的加工需求，并在产品两端预留加工空间。 设备Y轴需允许宽度为7米的产品以地面的方式进入设备加工区域，投标人投标时须给出物流方案，所需的AGV由招标人提供。设备的门设计需设计长度方向两侧开门，考虑产品考虑一侧进，另一侧出。 设备可进行开门加工，主轴吸尘需保证充分的除尘效率。 10.2 *机床速度： 最大进给速度：X轴≥40m/min，Y 轴≥40m/min，Z轴≥40m/min，A轴≥15rpm、C轴≥15rpm。 各轴最大加速度≥2m/s?。 10.3 *机床精度： 定位精度：X轴：≤0.075mm/全行程；Y轴：≤0.04mm/全行程；Z轴：≤0.02mm/全行程；A、C轴：≤20arcsec/全行程。 重复定位精度：X轴：≤0.037mm/全行程；Y轴：≤0.02mm/全行程；Z轴：≤0.01mm/全行程；A、C轴：≤10 arcsec/全行程。 机床位置精度按ISO 230-2或VDI/DGQ3441标准执行。 10.1 * Effective working schedule: X-axis: 22000mm; Y-axis: 7000mm; Z-axis: 2000mm; C-axis: ± 275; Axis A: ± 110 (spindle vacuum hood to avoid interference, axis A side stroke can be changed to 95°); The lowest point of the Z axis is 800mm above the ground, and the highest point is 2800mm above the ground, which is finally confirmed in the detailed design stage. When planning the travel size of the X axis of the equipment, the processing requirements of the product is 21 meters, and the processing space is reserved at both ends of the product. The Y axis of the equipment shall allow the products with a width of 7 meters to enter the equipment processing area in the form of ground. The bidder shall give the logistics plan when bidding, and the required AGV shall be provided by the tenderee. The door design of the equipment should be designed to open the door on both sides, considering the product into one side, the other side out. The equipment can open the door for processing, and the spindle dust collection needs to ensure sufficient dust removal efficiency. 10.2 * Machine speed: Maximum feed speed: 40m / min for X axis, 40m / min for Y axis, 40m / min for Z axis, 15rpm for A axis and 15rpm for C axis. The maximum acceleration of each axis is 2 m/s?. 10.3 * Machine tool accuracy: Positioning accuracy: X-axis: 0.075mm / full stroke; Y-axis: 0.04mm / full stroke; Z-axis: 0.02mm / full stroke; A and C axis: 20arcsec / full stroke. Repeated positioning accuracy: X-axis: 0.037mm / full stroke; Y-axis: 0.02mm / full stroke; Z-axis: 0.01mm / full stroke; A and C axis: 10 arcsec / full stroke. The accuracy of machine position is ISO 230-2 or VDI / DGQ3441 standard. |
3. 投标人资格要求
3.1如果投标的设备原产国为中华人民共和国关境内，投标人必须是所投设备的制造商。如果投标的设备原产国为中华人民共和国关境外，投标人可以是所投设备的制造商或制造商直接授权的代理商，若投标人为代理商则需提供制造商出具的授权书，否则其投标将被否决。如果境外投标人所投货物包含境内部分，则投标人须具备人民币结算能力，否则其投标将被否决。
3.2投标人须提供营业执照（企业登记证明材料）或经营许可证明文件。
3.3业绩要求：自2013年1月1日至投标截止时间（以合同签订时间为准）投标货物制造商应至少具有1台用于航空复材结构件制造或用于航空金属材料结构件制造的相关钻铣设备销售业绩（设备需为五轴设备，有效行程长度X≥10米，宽度Y≥4.5米，高度Z≥1.5米）。
证明材料包括：注1：销售合同及技术协议中主要功能的复印件须能体现签订时间，销售产品内容、规格及数量，签章双方等关键信息，并提供验收证明，否则将被作为无效证明材料，合同或订单卖方是制造商或其代理商的均认可。注2：上述复材/航空复材特指航空碳纤维复合材料，金属材料特指航空铝合金材料。
3.4境内投标人应当提供在开标日前3个月内由其开立基本账户的银行（开户银行）开具的有效银行资信证明的原件或复印件或提供2022年、2023年度会计师事务所出具的财务审计报告和经审计的资产负债表、利润表、现金流量表。
3.5至投标截止时间，境内投标人若被人民法院列为失信被执行人或被中华人民共和国应急管理部（包括原国家安全监管总局）列入安全生产不良记录“黑名单”，其投标将被否决。
注：失信人信息查询方式：①中国执行信息公开网（http://zxgk.court.gov.cn/shixin/）；②中华人民共和国应急管理部（包括原国家安全监管总局）公布的失信生产经营单位及其有关人员信息（黑名单）：中华人民共和国应急管理部和原国家安全监管总局政府网站。
3 Qualifications or Performance to Bidder：
3.1 If the country of origin of the equipment is the People's Republic of China, the bidder must be the manufacturer of the equipment. If the country of origin of the bid equipment is outside the People's Republic of China, the bidder may be the manufacturer of the invested equipment or the agent directly authorized by the manufacturer. If the bidder is the agent, it shall provide the authorization letter issued by the manufacturer, otherwise the bid will be rejected. If the goods submitted by the overseas bidder include the domestic part, the bidder must have the ability to settle in RMB, otherwise his bid will be rejected.
3.2 The bidder shall provide the business license (the enterprise registration certificate material) or the business license certificate document.
3.3 performance requirements: since January 1,2013 solstice bid deadline (subject to the contract time) the bidding goods manufacturer should have at least 1 for aviation composite structure manufacturing and for aviation metal material structure manufacturing of related drilling and milling equipment sales (equipment for five axis equipment, effective travel length X 10 meters, width Y 4.5 meters, height Z 1.5 meters).
Certification materials include: note 1: sales contract and technical agreement copy must be able to reflect the main function signed time, sales product content, specifications and quantity, sign both parties and other key information, and provide acceptance certificate, otherwise will be used as invalid proof, contract or order seller is the manufacturer or its agents. Note 2: The above composite / aviation composite refers to aviation carbon fiber composite, and metal material refers to aviation aluminum alloy.
3.4 The domestic bidder shall provide the original or photocopy of the valid bank credit certificate issued by the bank (opening bank) where the basic account is opened within 3 months before the bid opening date, or provide the financial audit report and the audited balance sheet, profit statement and cash flow statement issued by the accounting firm in 2022 and 2023.
3.5 Until the deadline for bidding, if a domestic bidder is listed as the person subject to enforcement for trust-breaking by the people's court or listed in the "blacklist" of the Ministry of Emergency Management of the People's Republic of China (including the former State Administration of Safety), his bid will be rejected.
Note: Information inquiry method of trust-breaking persons: ① China Executive Information Disclosure Network (http: / / zxgk.court.gov. Cn / shixin /); ② Information of trust-breaking production and business entities and their related personnel published by the Ministry of Emergency Management, PRC (including the former State Administration of Safety) (blacklist): the website of the Ministry of Emergency Management, PRC and the government website of the former State Administration of Safety.
是否允许联合体投标：不允许
Joint Bids：NOT Available
未领购招标文件是否可以参加投标：不允许
Bid without the bidding documents：NOT Available
4. 招标文件的获取Acquisition of Bidding Documents
招标文件领购开始时间：2024-09-14
Beginning of Selling Bidding Documents：2024-09-14
招标文件领购结束时间：2024-09-24
Ending of Selling Bidding Documents：2024-09-24
获取招标文件方式：潜在投标人可从2024年9月14日起至2024年9月24日，登陆中化商务电子招投标平台http://e.sinochemitc.com/，进入网络标书销售系统购买招标文件。购标人需先进行网上注册（免费），具体步骤请参考帮助中心-招投标指南。本招标文件售价为0元/包件，电子平台使用费人民币1000元/包件或150美元/包件。支付成功后，可下载招标文件及增值税电子普通发票。
Interested bidders may, from September 13th, 2024 to September 23, 2024, log on to the Sinochem Commerce Electronic Bidding and Tendering Platform http://e.sinochemitc.com/, and enter the online sales system of bidding documents. The buyer of bidding documents shall first freely register online following Help – Guide for Bidding and Tendering. The price of this bidding document is RMB 0 per package, and the fee for using the electronic platform is RMB 1,000 per package or USD 150 per package. After successful payment, the buyer of bidding documents can download the bidding document and the ordinary electronic invoice inclusive of value-added tax.
5. 投标文件的递交Bid Submission
5.1所有投标文件应于2024年10月10日上午9:30时（北京时间）之前递交到以下地点：浙江省杭州市钱塘区江东五路3700号华瑞航空制造园区B01楼会议室。
5.1 All well-sealed tender documents shall be submitted to the following places before 9:30 am on October 10,2024 (Beijing time): Conference Room, Building B01, Huarui Aviation Manufacturing Park, No.3700, Jiangdong Fifth Road, Qiantang District, Hangzhou city, Zhejiang Province.
5.2开标时间为2024年10月10日上午9:30时（北京时间），地点为：浙江省杭州市钱塘区江东五路3700号华瑞航空制造园区B01楼会议室，届时请投标人代表出席开标仪式。
5.2 The bid opening time is 9:30 am on October 10,2024 (Beijing time), at the conference room, Building B01, Huarui Aviation Manufacturing Park, No.3700, Jiangdong Fifth Road, Qiantang District, Hangzhou city, Zhejiang Province. The bidders are invited to attend the bid opening ceremony.
5.3逾期送达的、未送达指定地点的或者不按照招标文件要求密封的投标文件，招标人将予以拒收。
5.3 Bid documents arriving late, not delivered to the designated place or not sealed as required in the bidding documents, if any, will be rejected by the tenderee.
6. 投标人在投标前需在中国国际招标网上完成注册。评标结果将在中国国际招标网公示。
The evaluation results will be released on www.chinabidding.com
7. 联系方式
Contact Details
招标人：浙江华瑞航空制造有限公司
Purchasers：Huarui Aerospace Manufacturing Co., Ltd.
地址：中国浙江省杭州市钱塘区江东五路3700号
Add.：No.3700, Jiangdong Fifth Road, Qiantang District, Hangzhou, Zhejiang, China
联系人：尹先生
Contact：Mr.Yin
联系方式：0571-88391920
Business contact number: + 86-0571-88391952
招标代理机构：中化商务有限公司
Bidding Agency：Sinochem Commerce Co., Ltd.
地址：中国北京市丰台区丽泽路24号院平安幸福中心B座25层
Add.：25 F, Block B, Safe Happiness Center, Courtyard 24, Lize Road, Fengtai District, Beijing, China
联系人：宋子瑜、王宏伟、黄凡
Contact：Song Ziyu, Wang Hongwei, Huang Fan.
业务联系电话：+86-18501092630、+86-010-83923408
Business contact number: + 86-18501092630, + 86-010-83923408
传真：+86-010-83923200
Fax: + 86-010-83923200
电子邮件：songziyu@sinochem.com、wanghongwei02@sinochem.com
Email: songziyu@sinochem.com、wanghongwei02@sinochem.com
8. 外币购买招标文件账号：
户名：中化商务有限公司
开户行：中国银行股份有限公司北京丰台支行
账号：348056025289
SWIFT Code：BKCH CN BJ 110
8. Account information for purchasing bidding documents (foreign currencies):
Account name: Sinochem Commerce Co., Ltd.
Bank Name: Bank of China, Beijing Fengtai Sub-Branch
Account No.: 348056025289
SWIFT Code: BKCH CN BJ 110
浙江华瑞航空制造有限公司钻铣设备国际招标项目招标公告
Tender announcement International bidding project of drilling and milling equipment of Huarui Aerospace Manufacturing Co., Ltd.
1. 招标条件Bidding Conditions
项目概况：钻铣设备
Overview: Erilling and Milling Equipment
资金到位或资金来源落实情况：国内自筹
Source of Funds：Domestic self-raised
项目已具备招标条件的说明：项目已审批，资金已落实
Description of The Prepared Bidding Conditions: Project has been considered, funds have been implemented
2. 招标内容Bidding Content
招标项目编号：0747-2440SCCZAH46
Bidding No：0747-2440SCCZAH46
招标项目名称：浙江华瑞航空制造有限公司钻铣设备国际招标项目
Project Name：International bidding project of drilling and milling equipment of Huarui Aerospace Manufacturing Co., Ltd.
项目实施地点：浙江省杭州市
Place of Implementation：Hangzhou, Zhejiang
招标产品列表：
序号 NO. | 产品名称Product Name | 数量 Quantity | 简要技术规格Main Technical Data |
1 | 钻铣设备 Erilling and Milling Equipment | 1台 1 set | 10.1 *有效工作行程: X轴：≥22000mm；Y轴：≥7000mm；Z轴：≥2000mm； C轴: ≥±275?； A轴：≥±110?（主轴吸尘罩规避干涉，A轴一侧行程可变为≥95°）； Z轴最低点初步规划距地面800mm，最高点初步规划距地面2800mm，最终在详细设计阶段确认。 设备X轴行程尺寸规划时需考虑长度21米产品的加工需求，并在产品两端预留加工空间。 设备Y轴需允许宽度为7米的产品以地面的方式进入设备加工区域，投标人投标时须给出物流方案，所需的AGV由招标人提供。设备的门设计需设计长度方向两侧开门，考虑产品考虑一侧进，另一侧出。 设备可进行开门加工，主轴吸尘需保证充分的除尘效率。 10.2 *机床速度： 最大进给速度：X轴≥40m/min，Y 轴≥40m/min，Z轴≥40m/min，A轴≥15rpm、C轴≥15rpm。 各轴最大加速度≥2m/s?。 10.3 *机床精度： 定位精度：X轴：≤0.075mm/全行程；Y轴：≤0.04mm/全行程；Z轴：≤0.02mm/全行程；A、C轴：≤20arcsec/全行程。 重复定位精度：X轴：≤0.037mm/全行程；Y轴：≤0.02mm/全行程；Z轴：≤0.01mm/全行程；A、C轴：≤10 arcsec/全行程。 机床位置精度按ISO 230-2或VDI/DGQ3441标准执行。 10.1 * Effective working schedule: X-axis: 22000mm; Y-axis: 7000mm; Z-axis: 2000mm; C-axis: ± 275; Axis A: ± 110 (spindle vacuum hood to avoid interference, axis A side stroke can be changed to 95°); The lowest point of the Z axis is 800mm above the ground, and the highest point is 2800mm above the ground, which is finally confirmed in the detailed design stage. When planning the travel size of the X axis of the equipment, the processing requirements of the product is 21 meters, and the processing space is reserved at both ends of the product. The Y axis of the equipment shall allow the products with a width of 7 meters to enter the equipment processing area in the form of ground. The bidder shall give the logistics plan when bidding, and the required AGV shall be provided by the tenderee. The door design of the equipment should be designed to open the door on both sides, considering the product into one side, the other side out. The equipment can open the door for processing, and the spindle dust collection needs to ensure sufficient dust removal efficiency. 10.2 * Machine speed: Maximum feed speed: 40m / min for X axis, 40m / min for Y axis, 40m / min for Z axis, 15rpm for A axis and 15rpm for C axis. The maximum acceleration of each axis is 2 m/s?. 10.3 * Machine tool accuracy: Positioning accuracy: X-axis: 0.075mm / full stroke; Y-axis: 0.04mm / full stroke; Z-axis: 0.02mm / full stroke; A and C axis: 20arcsec / full stroke. Repeated positioning accuracy: X-axis: 0.037mm / full stroke; Y-axis: 0.02mm / full stroke; Z-axis: 0.01mm / full stroke; A and C axis: 10 arcsec / full stroke. The accuracy of machine position is ISO 230-2 or VDI / DGQ3441 standard. |
3. 投标人资格要求
3.1如果投标的设备原产国为中华人民共和国关境内，投标人必须是所投设备的制造商。如果投标的设备原产国为中华人民共和国关境外，投标人可以是所投设备的制造商或制造商直接授权的代理商，若投标人为代理商则需提供制造商出具的授权书，否则其投标将被否决。如果境外投标人所投货物包含境内部分，则投标人须具备人民币结算能力，否则其投标将被否决。
3.2投标人须提供营业执照（企业登记证明材料）或经营许可证明文件。
3.3业绩要求：自2013年1月1日至投标截止时间（以合同签订时间为准）投标货物制造商应至少具有1台用于航空复材结构件制造或用于航空金属材料结构件制造的相关钻铣设备销售业绩（设备需为五轴设备，有效行程长度X≥10米，宽度Y≥4.5米，高度Z≥1.5米）。
证明材料包括：注1：销售合同及技术协议中主要功能的复印件须能体现签订时间，销售产品内容、规格及数量，签章双方等关键信息，并提供验收证明，否则将被作为无效证明材料，合同或订单卖方是制造商或其代理商的均认可。注2：上述复材/航空复材特指航空碳纤维复合材料，金属材料特指航空铝合金材料。
3.4境内投标人应当提供在开标日前3个月内由其开立基本账户的银行（开户银行）开具的有效银行资信证明的原件或复印件或提供2022年、2023年度会计师事务所出具的财务审计报告和经审计的资产负债表、利润表、现金流量表。
3.5至投标截止时间，境内投标人若被人民法院列为失信被执行人或被中华人民共和国应急管理部（包括原国家安全监管总局）列入安全生产不良记录“黑名单”，其投标将被否决。
注：失信人信息查询方式：①中国执行信息公开网（http://zxgk.court.gov.cn/shixin/）；②中华人民共和国应急管理部（包括原国家安全监管总局）公布的失信生产经营单位及其有关人员信息（黑名单）：中华人民共和国应急管理部和原国家安全监管总局政府网站。
3 Qualifications or Performance to Bidder：
3.1 If the country of origin of the equipment is the People's Republic of China, the bidder must be the manufacturer of the equipment. If the country of origin of the bid equipment is outside the People's Republic of China, the bidder may be the manufacturer of the invested equipment or the agent directly authorized by the manufacturer. If the bidder is the agent, it shall provide the authorization letter issued by the manufacturer, otherwise the bid will be rejected. If the goods submitted by the overseas bidder include the domestic part, the bidder must have the ability to settle in RMB, otherwise his bid will be rejected.
3.2 The bidder shall provide the business license (the enterprise registration certificate material) or the business license certificate document.
3.3 performance requirements: since January 1,2013 solstice bid deadline (subject to the contract time) the bidding goods manufacturer should have at least 1 for aviation composite structure manufacturing and for aviation metal material structure manufacturing of related drilling and milling equipment sales (equipment for five axis equipment, effective travel length X 10 meters, width Y 4.5 meters, height Z 1.5 meters).
Certification materials include: note 1: sales contract and technical agreement copy must be able to reflect the main function signed time, sales product content, specifications and quantity, sign both parties and other key information, and provide acceptance certificate, otherwise will be used as invalid proof, contract or order seller is the manufacturer or its agents. Note 2: The above composite / aviation composite refers to aviation carbon fiber composite, and metal material refers to aviation aluminum alloy.
3.4 The domestic bidder shall provide the original or photocopy of the valid bank credit certificate issued by the bank (opening bank) where the basic account is opened within 3 months before the bid opening date, or provide the financial audit report and the audited balance sheet, profit statement and cash flow statement issued by the accounting firm in 2022 and 2023.
3.5 Until the deadline for bidding, if a domestic bidder is listed as the person subject to enforcement for trust-breaking by the people's court or listed in the "blacklist" of the Ministry of Emergency Management of the People's Republic of China (including the former State Administration of Safety), his bid will be rejected.
Note: Information inquiry method of trust-breaking persons: ① China Executive Information Disclosure Network (http: / / zxgk.court.gov. Cn / shixin /); ② Information of trust-breaking production and business entities and their related personnel published by the Ministry of Emergency Management, PRC (including the former State Administration of Safety) (blacklist): the website of the Ministry of Emergency Management, PRC and the government website of the former State Administration of Safety.
是否允许联合体投标：不允许
Joint Bids：NOT Available
未领购招标文件是否可以参加投标：不允许
Bid without the bidding documents：NOT Available
4. 招标文件的获取Acquisition of Bidding Documents
招标文件领购开始时间：2024-09-14
Beginning of Selling Bidding Documents：2024-09-14
招标文件领购结束时间：2024-09-24
Ending of Selling Bidding Documents：2024-09-24
获取招标文件方式：潜在投标人可从2024年9月14日起至2024年9月24日，登陆中化商务电子招投标平台http://e.sinochemitc.com/，进入网络标书销售系统购买招标文件。购标人需先进行网上注册（免费），具体步骤请参考帮助中心-招投标指南。本招标文件售价为0元/包件，电子平台使用费人民币1000元/包件或150美元/包件。支付成功后，可下载招标文件及增值税电子普通发票。
Interested bidders may, from September 13th, 2024 to September 23, 2024, log on to the Sinochem Commerce Electronic Bidding and Tendering Platform http://e.sinochemitc.com/, and enter the online sales system of bidding documents. The buyer of bidding documents shall first freely register online following Help – Guide for Bidding and Tendering. The price of this bidding document is RMB 0 per package, and the fee for using the electronic platform is RMB 1,000 per package or USD 150 per package. After successful payment, the buyer of bidding documents can download the bidding document and the ordinary electronic invoice inclusive of value-added tax.
5. 投标文件的递交Bid Submission
5.1所有投标文件应于2024年10月10日上午9:30时（北京时间）之前递交到以下地点：浙江省杭州市钱塘区江东五路3700号华瑞航空制造园区B01楼会议室。
5.1 All well-sealed tender documents shall be submitted to the following places before 9:30 am on October 10,2024 (Beijing time): Conference Room, Building B01, Huarui Aviation Manufacturing Park, No.3700, Jiangdong Fifth Road, Qiantang District, Hangzhou city, Zhejiang Province.
5.2开标时间为2024年10月10日上午9:30时（北京时间），地点为：浙江省杭州市钱塘区江东五路3700号华瑞航空制造园区B01楼会议室，届时请投标人代表出席开标仪式。
5.2 The bid opening time is 9:30 am on October 10,2024 (Beijing time), at the conference room, Building B01, Huarui Aviation Manufacturing Park, No.3700, Jiangdong Fifth Road, Qiantang District, Hangzhou city, Zhejiang Province. The bidders are invited to attend the bid opening ceremony.
5.3逾期送达的、未送达指定地点的或者不按照招标文件要求密封的投标文件，招标人将予以拒收。
5.3 Bid documents arriving late, not delivered to the designated place or not sealed as required in the bidding documents, if any, will be rejected by the tenderee.
6. 投标人在投标前需在中国国际招标网上完成注册。评标结果将在中国国际招标网公示。
The evaluation results will be released on www.chinabidding.com
7. 联系方式
Contact Details
招标人：浙江华瑞航空制造有限公司
Purchasers：Huarui Aerospace Manufacturing Co., Ltd.
地址：中国浙江省杭州市钱塘区江东五路3700号
Add.：No.3700, Jiangdong Fifth Road, Qiantang District, Hangzhou, Zhejiang, China
联系人：尹先生
Contact：Mr.Yin
联系方式：0571-88391920
Business contact number: + 86-0571-88391952
招标代理机构：中化商务有限公司
Bidding Agency：Sinochem Commerce Co., Ltd.
地址：中国北京市丰台区丽泽路24号院平安幸福中心B座25层
Add.：25 F, Block B, Safe Happiness Center, Courtyard 24, Lize Road, Fengtai District, Beijing, China
联系人：宋子瑜、王宏伟、黄凡
Contact：Song Ziyu, Wang Hongwei, Huang Fan.
业务联系电话：+86-18501092630、+86-010-83923408
Business contact number: + 86-18501092630, + 86-010-83923408
传真：+86-010-83923200
Fax: + 86-010-83923200
电子邮件：songziyu@sinochem.com、wanghongwei02@sinochem.com
Email: songziyu@sinochem.com、wanghongwei02@sinochem.com
8. 外币购买招标文件账号：
户名：中化商务有限公司
开户行：中国银行股份有限公司北京丰台支行
账号：348056025289
SWIFT Code：BKCH CN BJ 110
8. Account information for purchasing bidding documents (foreign currencies):
Account name: Sinochem Commerce Co., Ltd.
Bank Name: Bank of China, Beijing Fengtai Sub-Branch
Account No.: 348056025289
SWIFT Code: BKCH CN BJ 110
